OPERATION INSTRUCTIONS

To get the best results with your new PULL-TITE® tool, please follow these few basic instructions:

1. Adjust the vise-grip® pliers and clamp down securely on the roofing membrane.

2. Slide the PULL-TITE® tool away from the membrane to remove the slack in the cable, keeping the tool in-line with vise-grip® to prevent damage.

3. When using the PULL-TITE® on a slick surface, tighten the two stainless steel screws on the bottom plate. The screws should not be used when the tool is resting on the roofing membrane.

4. Apply pressure with knee, hand, or foot on the push pedal to reach the desired tension on the roofing membrane.

5. Install roofing fasteners or hot air seaming, release the vise-grip®, move on, and repeat from step No. 1.